Remac M1 Smart Curtain Track: Motorized Curtains, DIY
I put a motorized curtain track over our sliding glass door to see if a DIY kit could really give us app, voice, and scheduled curtains without an electrician. It could, in an afternoon.
https://www.youtube.com/watch?v=Y9qfXq40r0Y
THE VERDICT
This is the smart home upgrade I didn't expect to like as much as I do. The Remac M1 turns ordinary curtains into ones that open on a schedule, on command, or from your phone, and the install is genuinely DIY. The track is telescopic, so there's no cutting: you extend it to your window, lock it, and mount it. It pairs over Matter natively, so there's no hub to buy, and it drives heavy blackout curtains without complaining, at under 45 dB. The power cord hanging outside the curtain is the one thing I'd change, and it's center-split only, but neither stopped me from using it every single day.
Motorized curtains have always felt like one of those things you either pay a professional for or skip entirely. Custom track, cut to length, wired in, priced accordingly. So the real question for this Remac M1 Smart Curtain Track review was simple: can a regular person put this up over a sliding glass door in an afternoon and actually end up with curtains that open themselves?
Short answer, yes. Here's how it went.
The no-cut telescopic track is the whole trick
This is the part that makes it DIY-able. Instead of measuring and cutting a rail to length, the M1's track is telescopic: you pull it out to match your window, lock it down, and you're done. No saw, no custom order, no measuring twice and cutting once and hoping. I extended it across our slider, locked it, and it was ready to mount. That single design choice removes the step that usually sends people to a professional.
Install was an afternoon, and no electrician
Mounting is straightforward: brackets up, track in, curtains on, plug it in. I put ours on the ceiling above the sliding glass door, and the hardest part was holding the rail steady on the ladder. If you've ever hung a curtain rod, this is that plus one plug. No wiring into the wall, no trades, no permits.
Native Matter means no hub to buy
This is a bigger deal than it sounds. A lot of smart blinds and curtain motors need their own bridge or hub before they'll talk to anything. The M1 supports Matter natively, so it paired straight into my home without an extra box plugged in somewhere. Scan, pair, name it, done. It shows up like any other accessory and just works.
App, voice, and a physical remote
You get all three ways in. There's app control from your phone, Alexa voice control so you can just say the word, and a small physical remote for anyone in the house who doesn't want to open an app. Nice touch: you can open the curtains to any percentage you want, not just fully open or fully closed. Half open on a hot afternoon is a real setting, and I use it more than I expected.
Scenes and schedules are where it clicks
The moment this stopped being a gadget and started being useful was when I put it on a schedule. Curtains open with a Good Morning scene, close when the last person leaves the house, and drop for a Movie scene. You set it once and then it just happens in the background. That's the whole promise of home automation, and this is one of the few products that delivers it without a project.
The best smart home devices are the ones you stop thinking about. Two weeks in, I forget this is even automated until I'm at someone else's house closing curtains by hand.
It handles heavy curtains, quietly
Our curtains are heavy blackout panels, which is exactly where cheap motors give up. The M1's 18W motor pulls them without straining, and it runs at under 45 dB, so it's a soft whir rather than a grinding noise. Quiet enough that a scheduled open in the morning doesn't jolt anyone awake.
Remac M1 specs
Track telescopic, no cutting required
Motor 18W, handles heavy blackout curtains
Noise under 45 dB
Connectivity native Matter, no hub required
Control app, Alexa voice, and physical remote
Positioning open to any percentage
Automation scenes and schedules
Install DIY, no electrician required
Deal 10% off with code R2V5DYCY, valid July 21 to August 31, 2026
What I liked
✦ No-cut telescopic track: extend, lock, mount. This is what makes it a DIY job.
✦ Native Matter means no hub to buy and instant pairing.
✦ App, Alexa voice, and a physical remote, so everyone in the house has a way in.
✦ Opens to any percentage, not just all the way or not at all.
✦ Scenes and schedules that actually run in the background.
✦ Strong enough for heavy blackout curtains, and quiet at under 45 dB.
What I'd change
✦ The power cord hangs outside the curtain, so you can see it unless you plan your outlet placement.
✦ It's a center-split design only, so both panels part in the middle. On our slider it still opens plenty wide, but a one-way draw option would be welcome.
Should you buy the Remac M1?
Buy it if you want motorized curtains without a project
Sliding glass doors, bedrooms, living rooms, anywhere you open and close curtains every day, this is the easy win. The telescopic track and Matter pairing take out the two steps that usually stop people, and once it's on a schedule you'll stop touching your curtains entirely. You can check the current price here: Remac M1 Smart Curtain Track on Amazon, and code R2V5DYCY takes 10% off through August 31, 2026.
Think twice if you need a one-way draw or hidden wiring
If your window really needs curtains that pull to one side, or you can't live with a visible power cord near the track, plan around that before you order. For most standard windows and sliders, neither is a dealbreaker.